home *** CD-ROM | disk | FTP | other *** search
-
- On 4 Jan 1996, A.Laughton wrote:
-
- > I`ve just tried adding a second IDE Hard drive to my 4000 and seem to
- > have upset the first drive which is now no longer recognised.
- > I removed the second drive but the first one still doesnt boot :(
- > However if I boot from floppy and run HDToolbox all my partitions
- > suddenly appear on the workbench perfectly :)
- >
- In IDE land you need to assign one drive as Master and one as Slave.
- There are jumpers that need to be set on both drives. See the spec sheets
- for the respective drives.
-
- Good luck, if all else fails wave a dead chicken over your amiga, it's
- often worked for me when all else failed.
- --------------------------------------------------------------------------
- Salvatore V. Barrera Finger for PGP public key
- sbarr@alcor.concordia.ca alcor.concordia.ca/~sbarr/
- --------------------------------------------------------------------------
-
-
-